Skip to Content

General Terms and Conditions

Version 2026110801, as of 8 November 2026

For contracts concluded before 8 November 2026, the version incorporated at the time of conclusion applies until an amendment has been effectively agreed.

§1 Parties

  1. inducio GmbH is referred to as the contractor.
  2. The contractual partner of inducio GmbH is referred to as the client.
  3. These terms and conditions apply to entrepreneurs within the meaning of Section 14 of the German Civil Code (BGB), legal entities under public law and special funds under public law. The contractor does not conclude contracts with consumers on the basis of these terms and conditions.

§2 Subject matter of the contract and scope of services

  1. These General Terms and Conditions contain fundamental provisions for the business relationships of inducio GmbH with its clients. They form the framework for all services of the contractor. Which services the client obtains, to what extent, under which service description, with which service level, for what remuneration and for what term results solely from the order under §2a. These terms and conditions do not establish any obligation to provide a service that the order does not name.
  2. These terms and conditions apply to the following types of service of the contractor, which are only listed rudimentarily here. The services are specified in detail in the service descriptions and in the order. In the order, the client selects which services it commissions.
Type of serviceDescription
Provision of hardware and software as well as warranty services
Hardware deliveryHardware such as switches, computers, servers, monitors etc. is delivered
Software deliverySoftware / computer programs are provided in accordance with the licence terms
Warranty servicesRepair or replacement of the IT component under the warranty contract
Rental of hardwareTo meet a time-limited need, hardware is temporarily provided to the client for a fee
Loan of hardwareTo meet a time-limited need, hardware is temporarily provided to the client
ServicesAdditional services related to the IT system, mostly building on another contract
IT system fault rectificationHandling of IT system incidents
IT system careRegular checking of the backup system. Regular checking of the server environment for problems and, where applicable, optimisations. Regular checking of the firewall and, where applicable, optimisations
IT system maintenanceRegular maintenance of IT systems
Documentation servicesThe status quo of the existing system is recorded and documented using the accessible information
Surveillance services / monitoringVarious kinds of systematic recordings, measurements or observations of an operation or process by means of technical aids or other observation systems
Administration softwareTime-limited provision of the software for administration purposes, e.g. for authentication in the network (802.1x)
Hosting services / cloud computing
IaaS, Infrastructure as a ServiceResources such as CPU, RAM, disk capacity and network infrastructure are provided in a data centre
DaaS, Desktop as a ServiceThe back end of a virtual desktop infrastructure (VDI) is hosted in a data centre by a cloud service provider
FWaaS, Firewall as a ServiceIndividual firewall services (mail filtering, IDS, IPS, reverse proxy etc.) are hosted as a cloud service in a data centre by a cloud service provider
BaaS, Backup as a ServiceBackup services and storage space are provided as a cloud service in a data centre by a cloud service provider
SaaS, Software as a ServiceCloud service (licensing and distribution model) in which a cloud service provider hosts client and application software (hereinafter „software“)
Software of the manufacturer extocode GmbH (COD)Provision of the Central Operations Dashboard (COD) as an authorised partner of the manufacturer under the COD user agreement and the COD service description, in the operating modes Self Hosted, Shared Hosted and Private Hosted

3. Provisions of these terms and conditions that concern a particular type of service apply only insofar as the client has commissioned a service of that type. This applies in particular to §6, §7 and §10 (SaaS services), §8 and §15 (service and response times, hosting services), §13 (sale of hardware and delivery of software) and §14 (works).

§2a Conclusion of contract and order

  1. The contractor submits its offer to the client in an order document (hereinafter “order”, in these terms and conditions also “order form”). The order names the commissioned services with their service description and its version, the quantities, the remuneration and its invoicing, any booked service level, the start, minimum term and notice period, the contact persons of the contractual partners as well as the version of these terms and conditions with its number and the address at which it can be accessed. If a commissioned service includes the processing of personal data on behalf of the client, the order additionally names the contractor's data processing agreement with its version and address. Information that concerns only the individual client is stated solely in the order.
  2. The contractor is bound by the order until the end of the acceptance period stated therein or, if no period is stated, for 30 calendar days from receipt by the client. The client accepts the order unchanged within this period, namely by electronic signature via the platform provided by the contractor for this purpose, by transmitting the order signed or electronically signed by the client in text form, for example as a scan, or by confirming the order by email, provided that the remuneration under the order does not exceed EUR 5,000 net. The contract is concluded once the contractor has reviewed the acceptance and has sent the client an order confirmation in text form. If the client accepts the order with changes, this is deemed a new offer, which the contractor may accept in text form.
  3. For the electronic signature, a simple electronic signature within the meaning of Art. 3 No. 10 of Regulation (EU) No 910/2014 is sufficient. The contractor records the time, the signatory and the signed version and, together with the order confirmation, provides the client with the concluded order including the incorporated documents in a storable form.
  4. The following apply to the contract in this order of precedence: the order, the service descriptions named in the order in the version named there, these terms and conditions in the version named in the order. For the processing of personal data on behalf of the client, the data processing agreement takes precedence.
  5. Further orders that refer to these terms and conditions are concluded in accordance with No. 2. Each order is governed by the version of these terms and conditions that it names. §18 remains unaffected.
  6. Upon the conclusion of an order under No. 2 that names a data processing agreement under No. 1, that agreement is also concluded in the named version together with its annexes. A separate signature is not required, the agreement is available in electronic format (Art. 28 (9) GDPR). At the client's request, the contractual partners sign the applicable version without any deviation in content.

§3 Placing of orders and recording of effort

  1. Orders are entered by the client into the contractor's order processing systems by email or via the customer portal, as described in the order or in the service description, with a precise order or fault description. The contractor provides the client with the necessary access free of charge for the duration of the contractual relationship. If, in exceptional cases, it is technically impossible for the client to place orders by email or via the customer portal, orders may be placed by phone via the support hotline named in the order or in the service description.
  2. The contractor confirms receipt of the order promptly, stating the time of receipt and a case number.
  3. The contractor records the effort incurred separately for each case and activity. The client can, if required, inform themselves independently in the ticket system about the total effort already incurred for the individual orders, with the date and time of the activities.
  4. The contractor informs the client promptly about activities carried out and, where necessary/possible, passes on interim results or informs the client about the completion of the work order.
  5. The client names a responsible contact person for each case who can fully support the contractor in carrying out the necessary activities, provide the required resources and make the required decisions. If no contact person is named, the reporter or requester is regarded as the corresponding contact person.
  6. For queries regarding ongoing cases, the case number must be provided.
  7. The contractor makes the recorded service hours available to the client for review. It sends them as a timesheet overview by email or makes them available in the customer portal and informs the client of this by email. The email is sent to the person the client has designated for reviewing the hours. It states the day on which the review period ends. This day is at least 7 calendar days after receipt of the email. In each of these emails the contractor separately and prominently points out the end of the period and the significance of the client's silence. If the client does not raise objections in text form (by email or via the customer portal) by the end of that day, specifying the disputed hours, the provided hours are deemed acknowledged by the client. A query or objection in text form suspends the period. After clarification, a new period only begins with a new email stating a new end of the period. After the period has expired or after the client's express confirmation, the contractor invoices the acknowledged hours. Disputed hours are invoiced only after clarification. The acknowledgement merely establishes a rebuttable presumption of the correctness of the recorded hours. The client remains entitled to prove that the recorded hours were in fact not incurred or not to that extent. This provision applies only to clients who are entrepreneurs within the meaning of Section 14 of the German Civil Code (BGB), legal entities under public law or special funds under public law.

§4 Change Request / additional expenses

  1. The client is entitled, even after conclusion of the contract, to request changes to the delivery and/or service object if the deviations are, from an objective point of view, technically and logistically reasonable for the contractor, taking into account its business purpose, know-how and order situation. The contractor must review the client's change request and inform them in text form of its effects on the contractual structure. This duty to inform includes, where possible, a statement on whether the desired changes are technically and/or logistically possible and expedient at all, as well as a statement on the effects of the change requests on the previously agreed contractual structure, such as the concept, deadlines, dates, acceptance modalities and remuneration, in the form of an offer. The client must then decide without delay on whether the changes are to be carried out.
  2. With the positive decision and agreement on the changes to the contractual conditions, the change to the order becomes part of the contract.
  3. In the case of change requests by the client relating to the order object or order execution which are technical and economically insignificant for the contractor, a change to the contractual conditions cannot be demanded by the contractor.
  4. The client reimburses the additional expenses arising from the change request. This also includes the contractor's expenses for fulfilling the duty to inform under §4 No. 1.

§5 Acceptance of works

  1. The parties agree on an acceptance date. If no acceptance date is agreed, acceptance takes place after completion of the work.
  2. Works are subjected to an acceptance test after being provided by the contractor. After completion of the acceptance test, the client will declare acceptance of the service, provided the service is free of defects.
  3. Acceptance must be made in text form. Without a declaration of acceptance, a service is deemed accepted if the client has used it for its intended purpose for 14 calendar days outside agreed test processes or test procedures without notifying any defect.

§6 Provision of software and rights of use for SaaS contract services

  1. The contractor (hereinafter „provider“) provides the client with the use of the software specified in the service description within the range of functions described there and under the functional prerequisites likewise stated there. The software is provided for use by the provider at the handover point agreed in the service description (interface of the data network operated by the provider to other networks). The software remains on the provider's server. The establishment and maintenance of the data connection between the client's IT system and the handover point operated by the provider is not owed by the provider.
  2. The current range of functions of the software results from its current service description. Outside of release changes, the provider may, within the scope of technical possibilities, modify the software and use it in the version currently offered by the manufacturer, if the change to the software is reasonable for the client taking the provider's interests into account. However, the client has no claim to the use of a new version of the software named in the service description.
  3. The provider remedies software errors within the scope of technical possibilities. An error exists if the software does not fulfil the functions stated in the service description.
  4. At the client's request, the provider takes over the planning and execution of release changes. This service must be agreed separately between the client and the provider in detail, including with regard to any hardware and database extensions to be modified as well as the consequences for the operation of the software and its costs.
  5. The provider grants the client the non-exclusive and non-transferable right to use the software designated in this contract within the scope of the SaaS services as specified in the service description. The workstations must meet the minimum technical requirements stated in the service description. The connection of the client's workstations is established via a data connection to be set up by the client in accordance with the information in the service description.
  6. The software is provided to the client at its choice in accordance with the provisions of the service level agreement.
  7. The client may only modify or reproduce the software insofar as this is covered by the intended use of the software according to the respective current service description. Necessary reproduction includes loading the software into the working memory on the provider's server, but not even the temporary installation or storage of the software on data carriers (such as hard disks or similar) of the hardware used by the client. This does not apply to client software which, according to the service description, is to be installed on the client's workstation computers.
  8. The client is not entitled to provide the software to third parties for use, whether for a fee or free of charge. A third party is not someone who is a vicarious agent of the client and uses the services free of charge, such as employees of the client, freelancers within the scope of the order relationship, etc.

§7 Data storage and handover for SaaS contract services, rights of the contractor

  1. The client has the option of storing data on the virtual data server set up for them by the contractor (hereinafter provider), which they can access in connection with the use of the provided software. The provider owes the provision of storage space for use by the client. It has safekeeping and custody obligations with regard to the data transmitted and processed by the client only insofar as these are agreed in the service description, in particular for Backup as a Service, or in the data processing agreement. The provider's obligations under Art. 28 and Art. 32 GDPR remain unaffected. The client is responsible for compliance with the commercial and tax retention periods. The client undertakes not to store any content on the storage space whose provision, publication or use violates applicable law or agreements with third parties.
  2. The amount of storage space available to the client is defined in the service description. It also explains how the data is processed. The client can store the data on the data server as part of a database migration and as part of the ongoing use of the software.
  3. In the case of migrating data from a database of the client, the client must provide the provider with the information on the database management system required for the migration, including any test data, to the extent set out in the service description, if necessary after separate agreement, at least eight weeks before the intended migration of the data. The data to be migrated must then be provided to the provider on a data carrier likewise named in the service description or by remote data transmission at least five working days before the intended use of the data. The provider supports the client in migrating the data at the fees stated for this in the offer or in the price information sheet of the contractor in the version named in the order.
  4. The client is not entitled to provide this storage space to a third party, in part or in full, for use, whether for a fee or free of charge.
  5. The client grants the provider the right to reproduce the data to be stored by the provider for the client, insofar as this is necessary to provide the services owed under this contract. The provider is also entitled to keep the data in a backup data centre. To remedy incidents, the provider is further entitled to make changes to the structure of the data or the data format.

§8 Service and response times for IT incidents

  1. The contractor owes response times only if the client has booked a service level for the affected service. A service level is a separately agreed service for which the order form or the service description specifies response times. If no service level has been booked, the contractor nevertheless accepts reports of errors and malfunctions and processes them according to its available capacity (best effort). No response time is assured in that case. The client's rights in respect of defects remain unaffected.
  2. The following incident classes are defined:
    • Class 1: Malfunctions or poor response times of individual functions of a (sub-)system at individual workstations. The system remains usable here, possibly with restrictions.
    • Class 2: Malfunctions or poor response times of individual functions of a (sub-)system at all workstations. The system remains usable here, possibly with restrictions.
    • Class 3: Malfunction of a (sub-)system that is not essential for maintaining business operations. The affected (sub-)system is no longer usable.
    • Class 4: Malfunction of a (sub-)system that is essential for business operations. The affected (sub-)system is no longer usable.
  3. If a service level has been booked, the response times specified in the order form or the service description apply. Insofar as these do not specify anything for an incident class, the following response times apply where a service level has been booked:
    • Class 1: Start of incident rectification within five (5) working days
    • Class 2: Start of incident rectification within three (3) working days
    • Class 3: Start of incident rectification on the working day after next
    • Class 4: Start of incident rectification within the booked service level
  4. To ensure the response times, the client will state the corresponding incident class when entering it into the order processing system.
  5. A working day is defined as a weekday (Monday to Friday) that is not a nationwide public holiday. The working day begins at 9:00 and ends Monday to Thursday at 17:00, Friday at 15:00.
  6. If the client enters the incident into the order processing system by 12:00, the day of entry counts as the start of the response time. In the case of a later entry, the following working day counts as the start of the response time. If an SLA 4 level has been booked, the response time begins in any case on the same working day after entry.
  7. Service and project work is generally carried out on a working day. Where required within projects, other working times may be agreed.
  8. The time of service provision is determined
    • for service orders within the scope of incident rectification according to the response times stated above or, without a booked service level, according to No. 1,
    • for project and other service activities within the operational possibilities of the contractor, as agreed with the client.
  9. If the contractor exceeds a response time it owes, claims exist only under §15 and §16. The right to extraordinary termination for good cause under §12 No. 4 remains unaffected.

§9 Duties of cooperation of the client

  1. Responsibility for project organisation and planning as well as for project reporting generally lies with the client. The client's project manager bears overall responsibility for the professionally, timely and budget-compliant realisation of the project. The contractor's project manager will support the client's project manager in this. The contractor's project manager is responsible for leading the project team of the contractor's vicarious agents in professional and disciplinary terms, regardless of the place of performance.
  2. The client undertakes to fully support the contractor in carrying out the activities and provides the contractor in its premises, in particular, with rooms, systems and personnel as well as necessary documents and other operational resources free of charge.
  3. The client provides the systems and telecommunication connections required for remote access in its premises, upon request by the contractor, free of charge.
  4. The client will specify work orders for activities precisely and provide a precise fault description for errors that occur. Additional effort resulting from insufficient activity or fault descriptions by the client is borne by the client. At least the following information must be provided:
    • affected system components and users,
    • delimitation of the affected system components,
    • expected behaviour and actual behaviour,
    • start of the fault and times of the fault.
  5. The client ensures that the accident prevention regulations are observed and the necessary safety precautions are taken in the rooms and on the corresponding premises to be entered by the contractor. The client is responsible for damage arising from insufficient compliance with these regulations.
  6. The client provides a suitable system for the ISO 27001 (ISMS)-compliant documentation, otherwise the ISO 27001-compliant documentation is invoiced to the client by the contractor.
  7. For the recording of information security incidents, the client provides suitable systems (syslog server, network monitoring system, flow collector, etc.), otherwise the systems are invoiced to the client by the contractor.

§10 Special duties of cooperation of the client for SaaS contracts

  1. The client establishes the data connection between the workstations of the client intended for use and the data handover point defined by the contractor. The contractor is entitled to redefine the data handover point if this is necessary to enable smooth use of the services by the contractor. In this case, the client will establish a connection to the newly defined handover point.
  2. Within the scope of the SaaS contract, the contractual use of the contractor's services depends on the hardware and software used by the client, including workstation computers, routers, data communication means etc., meeting the minimum technical requirements for the use of the currently offered software version, and on the users authorised by the client to use the software being familiar with operating the software. The client will install the client software provided by the contractor, and subsequent updates as necessary, on each workstation computer from which it legitimately wants to access the software. In all other respects, it will only use hardware and software that meets the minimum requirements stated in the service description. Configuring its IT system is the client's task. The contractor offers to support it in this for a fee on the basis of a separate agreement.
  3. Within the scope of the SaaS service, the client is obliged to prevent unauthorised access by third parties to the protected areas of the software through suitable precautions. For this purpose, the client will, where necessary, instruct its employees to comply with copyright. The client is further obliged to check its data and information for viruses or other harmful components before input and to use virus protection programs corresponding to the state of the art for this. For access to the use of the SaaS services, the client will, where necessary, generate its own „user ID“ and password required for the further use of the SaaS services. The client is obliged to keep the „user ID“ and password secret and not to make them accessible to third parties.

§11 Prices and terms of payment

General

  1. Invoices issued are due for payment immediately unless a payment term is stated on the invoices. In the event of default, the contractor reserves the right to additionally charge reminder costs, default interest at the statutory rate (Section 288 (2) BGB) and the lump sum under Section 288 (5) BGB.
  2. If the client is more than 30 days in default with due payments, the contractor reserves the right not to provide any further services for the client until the latter has met its payment obligations. The suspension of the service due to default in payment does not entitle the client to extraordinary termination of the contract.

Services

  1. For services, the prices and conditions from the offer for the order apply or, insofar as the order refers to it, those from the price information sheet of the contractor in the version named there. When hour quotas are agreed, the client commits to corresponding minimum purchases. The chosen option is billed on a pro-rata basis at the times agreed in the order form.
  2. The contractor may, at its reasonable discretion, adjust the fees payable under the offer or the price information sheet to the development of the costs relevant to the price calculation. A price increase or reduction may be considered if, for example, the costs for procuring hardware and software as well as energy, the use of communication networks or labour costs increase or decrease, or other changes to the economic or legal framework lead to a changed cost situation. The contractor will inform the client of changes to the price information sheet in text form at least six weeks before the changes take effect.
  3. Working hours exceeding the hour quota are invoiced to the client by the contractor at the standard hourly rate after the service has been provided.
  4. For work at the client's site, the costs according to the offer or price information sheet are additionally due per trip. Billing takes place together with the billing of the work performed.
  5. Billing takes place on the basis of the effort acknowledged under §3 No. 7 or otherwise proven, insofar as remuneration based on effort has been agreed.

§12 Contract term and termination for services and hosting services / cloud computing

  1. The contract begins on the day named in the order, otherwise upon its conclusion under §2a, and has the minimum term specified in the order.
  2. The contractual partners have the right to terminate the contract after expiry of the minimum term with the period named in the order, otherwise with six months' notice to the end of the calendar year (notice period).
  3. The termination of the contract must have reached the other contractual partner in text form by the start of the notice period. The terminating party must provide proof of receipt of the termination.
  4. The right to extraordinary termination for good cause remains unaffected. The contractor is entitled to terminate without notice in particular if the client fails to make due payments despite a reminder and a grace period, or violates the contractual provisions on the use of the services.

§13 Sale of hardware and delivery of software / retention of title and warranty

  1. The contractor retains title to sold hardware until full payment.
  2. Insofar as sold hardware or delivered software is defective, the client is entitled, within the scope of the statutory provisions, to demand subsequent performance in the form of remedying the defect or delivering a defect-free item. The right to choose the type of subsequent performance lies with the contractor. If subsequent performance fails, the client is entitled to reduce the purchase price or, if the statutory requirements are met, to withdraw from the contract. A prerequisite for any warranty rights is that the client properly fulfils the inspection and notification obligations owed under §377 HGB (German Commercial Code).
  3. The limitation period for warranty claims, with the exception of claims for damages, is twelve months.

§14 Warranty for works

  1. The contractor provides the agreed service in the agreed scope and period.
  2. Claims for subsequent performance become time-barred after 12 months. This does not apply to work on a building within the meaning of Section 634a (1) No. 2 BGB, to claims for damages under §16 or in the case of fraudulent concealment of a defect. Subsequent performance is initially provided in the form of rectification and is limited to this. A new production is considered insofar as this is sensible from a purely economic or technical point of view.
  3. The contractor is not liable in cases where the client has made changes to the services provided by the contractor, unless these changes had no influence on the occurrence of the defect.

§15 Warranty for non-compliance with service and response times under §8 and for hosting services

  1. Insofar as the service level or the availabilities agreed for hosting services are not met for reasons for which the contractor and/or its subcontractor is responsible, the client may reduce the remuneration under No. 3 without prior assertion of a claim for subsequent performance and without setting a deadline. The right to extraordinary termination for good cause under §12 No. 4 and claims for damages under §16 remain unaffected. A reduction is offset against a claim for damages based on the same breach of duty.
  2. Warranty claims are excluded if
    • an impairment of the service occurs outside the network operated by the contractor, e.g. due to service failures and disruptions at other providers or telecommunication providers,
    • the client uses the system capacities in breach of contract, e.g. through an excessive number of accesses or other conduct in breach of contract,
    • the impairment is due to force majeure within the meaning of §16 No. 10,
    • the impairment is due to attacks by third parties on the contractor's infrastructure which the contractor could not repel despite compliance with the agreed protective measures and the state of the art.
  3. In the event that the client asserts a reduction right against the contractor, the reduction rate is calculated as follows:
    • For hosting services, the remuneration for the affected service is reduced for the reference period of the agreed availability by the percentage by which the agreed availability was undershot. Further claims exist only under §16.
    • For SLA 4 services, the remuneration in the respective calendar month is reduced by 4% (four per cent).

§16 Liability

  1. The contractor is liable without limitation for intent, for gross negligence of its legal representatives and executive employees, for damage arising from injury to life, body or health, in the case of fraudulent concealment of a defect, under the Product Liability Act and, where mandatory, under the TKG (German Telecommunications Act). The contractor does not assume any guarantees.
  2. Otherwise, in the case of negligence the contractor is only liable for the breach of essential contractual obligations. Essential obligations are those whose fulfilment makes the proper execution of the contract possible in the first place and on whose compliance the client may regularly rely. In this case, liability is limited to the damage typical of the contract and foreseeable at the time the contract was concluded.
  3. Liability under number 2 is limited, for all damage events of a contract year together, to half of the remuneration that the client actually paid for the affected order in the twelve months before the first damaging event of this contract year, but this limit amounts to at least half of the remuneration agreed for the first twelve months of the order.
  4. The contractor is liable for the loss of or damage to data only if the client has backed up its data regularly, at intervals appropriate to their nature and importance, in such a way that they can be restored with reasonable effort. Liability is then limited to the effort required to restore the data from the last such backup. If the client has commissioned the contractor with the backup, the backup owed under the service description takes the place of the client's backup. If that backup is missing because the contractor has breached this obligation, the contractor is liable under number 2 and number 3. Number 1 remains unaffected. The limitations under number 2 and number 3 apply in addition.
  5. Claims under number 2 become time-barred one year after the statutory commencement of the limitation period.
  6. The limitations also apply to claims in tort and in favour of the contractor's legal representatives, employees and vicarious agents. This does not change the burden of proof.
  7. The client must notify the contractor of defects without delay.
  8. In the event that the contractor's SaaS services are used by unauthorised third parties using the client's access data, the client is liable for the fees incurred thereby within the scope of civil liability until receipt of its order to change the access data or the report of the loss or theft.
  9. For SaaS services, the contractor is entitled to immediately block the storage space if there is reasonable suspicion that the stored data is unlawful and/or infringes the rights of third parties. Reasonable suspicion of unlawfulness and/or an infringement exists in particular if courts, authorities and/or other third parties inform the contractor of it. The contractor must notify the client of the block and the reason for it without delay. The block must be lifted as soon as the suspicion is refuted.
  10. In the case of force majeure, such as war, terrorism, unrest, fire, floods, pandemics or other unforeseeable events for which the contractor is not responsible, such as strikes in third-party businesses, publicly ordered lockdown, shortage of energy and raw materials, shortage of means of transport, insufficient deliveries from upstream service providers or disruption of gateways by telecommunication networks that are not within the contractor's control, the contractor is released from performance for as long and insofar as service impediments caused thereby exist. Delivery dates and deadlines are extended by the duration of the impediment plus a reasonable start-up period. If the impediment lasts longer than three months, either party may withdraw from or terminate the affected contract insofar as it has not yet been fulfilled. In these cases, claims for damages exist only insofar as the contractor is responsible for the impediment.

§17 Confidentiality and data protection

  1. The contractual partners undertake to maintain silence about all confidential matters that come to their knowledge in the course of the business relationship, in particular business and trade secrets of the other contractual party, and neither to pass these on nor to exploit them in any other way. This applies towards any unauthorised third parties, i.e. also towards unauthorised employees, insofar as the disclosure is not necessary for the proper fulfilment of the contractual obligations. The confidentiality obligation continues to apply even after termination of this contract. Naming under §17a does not breach this obligation.
  2. The contractual partners will process and use personal data of the respective other contractual partner in compliance with the provisions of the data protection laws and only for contractually agreed purposes. In particular, they will secure this data against unauthorised access and only pass it on to third parties with the consent of the other contractual partner or the persons concerned. Insofar as it is necessary for the execution of the order that the client grants the contractor access to personal data, the personnel deployed must likewise be informed of their data protection obligations and be bound in accordance with the data protection provisions. Insofar as commissioned processing takes place, this must be governed by a data processing agreement.

§17a Mutual naming as a reference

  1. The contractor may name the client as a customer and as a reference. For this purpose, it may use the company name or name of the client, its company logo and a brief, factual description of the services, in particular their type, the client's industry and the period.
  2. The client may name the contractor in the same way as its service provider or supplier, with the contractor's company name, company logo and a brief, factual description of the services.
  3. Naming is permitted in any form of advertising and self-presentation, in particular on websites and in social media, in customer and reference lists, offers, presentations and company profiles, in press releases, specialist articles and talks, and in requests to participate and bids in procurement procedures. It does not require consent in the individual case and is free of charge. After the end of the contract, it remains permitted as a reference for the services provided. Neither contractual partner is obliged to name the other.
  4. For the purposes under No. 1 to No. 3, each contractual partner grants the other the non-exclusive, non-transferable, territorially unrestricted and royalty-free right to reproduce, distribute and make publicly available its company name, its name and its company logo. The company logo is used only unaltered, in the form in which the entitled party itself uses it publicly or has provided it to the other.
  5. All rights to company names, names and company logos, in particular name rights, trademark rights and copyrights, remain with the contractual partner to whom they belong. Whoever names the other uses the other's company name, name and company logo as the signs of another undertaking and makes this recognisable. Naming does not establish any rights to these signs and no right of use beyond this section. In particular, it does not entitle anyone to alter the signs, to combine them with their own signs, to register them as a trademark, company name or domain or to allow third parties to use them. It must not create the impression that the named party recommends the other, is affiliated with it under company law or vouches for its services.
  6. Naming does not contain any confidential information within the meaning of §17 No. 1, any prices or other contract terms, or any information on security measures, network and system architecture, locations, vulnerabilities or security incidents of the other contractual partner. Each party uses quotations, ratings and case studies concerning the other contractual partner only after the latter's approval in text form.
  7. Each party uses names, images and statements of employees or other contact persons of the other contractual partner only with the separate consent of the person concerned. If the client is a natural person, for example a sole trader or a freelancer, the contractor names the client only with the client's separate consent. The contractor uses coats of arms, official seals and other sovereign emblems of a public-sector client only with the latter's consent in text form. Statutory confidentiality obligations, in particular for the protection of classified information, remain unaffected.
  8. An agreement between the contractual partners that expressly declares the naming or the fact of their cooperation to be confidential, or that excludes or restricts the naming, takes precedence over this section.
  9. Each contractual partner may object to being named by the other at any time, without giving reasons, with effect for the future. Text form is sufficient for the objection. The other party then no longer includes the objecting party in new documents and, within 30 days of receipt of the objection, removes its company name, name and company logo from its website, its social media presence and its templates, insofar as it can edit them itself. It is not obliged to recall or amend documents already printed, sent or published. The objection otherwise leaves the contract unaffected.
  10. In a procurement procedure, each contractual partner may state the contract to the contracting authority as evidence of its suitability, with the company name or name of the other, the type, period and scope of the services and, insofar as the contracting authority requires it, the contract value. This also applies after an objection under No. 9 and without consent under No. 7 sentence 2, as long as the information is given only to the contracting authority. No. 7 sentence 1 and No. 8 remain unaffected.

§18 Amendment of these Terms and Conditions

  1. The contractor may amend these terms and conditions and the service descriptions with effect for the future only for one of the following reasons:
    • a change in laws, regulations or supreme court case law affecting a provision of these terms and conditions or of a service description,
    • an order of an authority or a court,
    • a change in the services of manufacturers, suppliers or data centres that the contractor uses for the contractual service, insofar as the contractor cannot influence the change,
    • the technical further development of the service or the elimination of a security vulnerability,
    • the closing of a regulatory gap that has arisen after conclusion of the contract and makes the performance of the contract considerably more difficult,
    • the correction of typing errors, references and translations without changing the content.
  2. The list in No. 1 is exhaustive. Prices and charges are governed solely by §11.
  3. An amendment under No. 1 may not change the main performance obligations, the term or the remuneration and may not change the nature of the agreed service.
  4. The contractor gives notice of the amendment in text form at least six weeks before it takes effect. The notice states the reason under No. 1, the amended provisions, the number of the new version and the day on which it takes effect. If the client has agreed an electronic communication channel with the contractor, the notice may also be given by this channel, provided the client can store or print it in readable form.
  5. The client may object to the amendment in text form until the end of the day before it takes effect. No other time limit applies. If the client does not object in time, its consent is deemed given. The contractor points out the right to object, the time limit, the significance of the client's silence and the right of termination under No. 6 separately and prominently in the notice.
  6. If the client objects, the contract continues on the previous terms. The right of both contracting parties to ordinary termination remains unaffected. In addition, the client may, until the amendment takes effect, terminate the affected contract without observing a notice period with effect from that date.
  7. Each version of these terms and conditions bears a number and remains available on the contractor's website under /agb/ followed by this number. A contract is governed by the version incorporated at the time of its conclusion until an amendment under this section takes effect.

§19 Law and place of jurisdiction

  1. If the client is a merchant, a legal entity under public law or a special fund under public law, the place of jurisdiction for all disputes arising in the course of the execution and settlement of this contractual relationship is the registered office of the contractor.
  2. The contractual relationship is subject exclusively to the law of the Federal Republic of Germany, excluding the conflict of laws rules and the uniform UN Convention on Contracts for the International Sale of Goods (CISG).

§20 Final provisions

  1. The contractor may transfer the rights and obligations under this contract to a third party if the latter's qualification and capability ensure a contractual fulfilment of the obligations existing towards the client. The client already now irrevocably consents to such a releasing assumption of debt.
  2. Amendments and additions to the contract must be made in text form. This also applies to the amendment of this clause. The priority of an individual agreement under Section 305b BGB remains unaffected.
  3. The order and the service descriptions take precedence over these terms and conditions insofar as they provide otherwise (§2a No. 4). General terms and conditions and purchasing conditions of the client do not apply, even if the contractor does not expressly object to them.